Hello, welcome to Changzhou Bangnaide Metal Products Co., Ltd.!

  • Operation method of thermal spraying

    Release time: 2017-04-23
    According to the different heat sources used in thermal spraying and the state of the spraying material. Arc spraying is a method of generating an arc between two continuously fed metal wires that are respectively connected to the positive electrode and the negative electrode of a power supply. The heated molten part is atomized by a compressed air jet and sprayed onto the substrate to form a coating. Since this method is only suitable ...
  • Application of thermal spray technology

    Release time: 2017-04-23
    Whether it is a mechanical part or a metal component, the most prominent problem is surface wear or corrosion or both. Here is a brief introduction to coating application guidelines: 1. Wear resistance-the largest application area of thermal spray technology at high and low temperatures. This type of coating is specifically divided into the following types: (1) Adhesive resistance ...
  • Introduction of paint spraying techniques and methods

    Release time: 2017-04-23
    The paint used in the thermal spraying industry began in the early 20th century. It was first invented by Dr. MUSchoop in Zurich, Switzerland in 1910. In 1912, a wire flame spray gun was successfully developed. In 1916, a practical arc spray gun was developed. Paint wire flame spraying is still in use today. It is adopted ...
  • How does thermal spray heat spray materials?

    Release time: 2017-04-23
    1. Thermal spraying Thermal spraying is a method of heating a spraying material with a heat source, atomizing, spraying and depositing molten or nearly molten particles on the surface of a substrate to form a special surface layer. At the current stage, there are mainly three heat sources used for spraying; one is the arc heat source, the other is the plasma flame heat source, and the third is the gas heat ...
4 records 1/1 page
  • Contact:
    Manager Wang
  • Phone:
  • Business phone:
  • fax:
  • address:
    12 Liutang Industrial Park, Hengshan Bridge, Wujin District, Changzhou

Scan and follow us
CopyRight © 2017 Changzhou Bangnaide Metal Products Co., Ltd. All Rights Reserved Record Number: 苏 ICP 备 15060169 号
[Disclaimer] | [Admin Login] >